{{tag>Trusty installation réseau serveur}} ---- ====== NetBoot : installation par TFTP, PXE, DHCP ====== Ce document décrit une installation par le réseau, sur une machine pouvant démarrer PXE sur la carte réseau ou un autre média amovible Cette option de démarrage se configure dans le SETUP du PC client et elle est souvent appelée "Network Boot". Nous utiliserons un autre PC comme serveur et nous y installerons [[apt>isc-dhcp-server]] et [[apt>tftpd-hpa]] pour nous fournir les services et la configuration du fichier spécifique au système installé. Vous devez modifier les noms d'hôte et les adresses IP de ce document pour votre propre installation. Les principes décrits ici sont applicables à d'autres serveurs de DHCP et de TFTP que ceux spécifiés ci-dessous. Il existe une autre page sur le netboot permettant de démarrer une session //live//, comme depuis un CDRom ou une clé USB, disponible [[netboot_live|ici]]. \\ Préférez-la, si tel est votre but. ===== Explication du processus de démarrage PXE ===== - L'ordinateur client démarre par l'//interface réseau// en mode PXE. - Le serveur [[:isc-dhcp-server|DHCP]], présent sur le réseau, lui envoie le fichier [[#Installer les fichiers NETBOOT nécessaire au démarrage réseau|pxelinux.0]] précisé dans [[:isc-dhcp-server|filename de la section générale]]. - L'ordinateur client accède alors, par TFTP, au fichier de configuration de la machine se trouvant dans le répertoire [[#Configurer les fichiers PXELINUX.CFG|pxelinux.cfg]]. - Il charge le fichier de configuration par défaut. - Le fichier contient les informations nécessaire à l'affichage d'un menu sur l'écran de l'ordinateur client. ===== Description du matériel ===== Une machine cliente même sans lecteur de CD-ROM possédant une carte réseau compatible PXE. Il est à noter qu'elle peut amorcer sur une disquette ou sur un autre média amovible. La machine qui fait office de serveur **TFTP** et **DHCP** est basé sur GNU/Linux et possède l'adresse IP « 192.168.2.1 ». Vous devez être protégé et ne pas vous exposer sur Internet pour cet exercice.\\ Si votre Box ou Routeur internet ne protège pas votre serveur, installez le paquet [[apt>ufw]] et gérez votre protection en suivant la [[:ufw|documentation UFW]] ===== Installer et lancer le serveur DHCP ===== Voir la documentation sur [[isc-dhcp-server]]. Cette machine sert une adresse IP et les informations réseaux ainsi que le fichier « [[#Installer les fichiers NETBOOT nécessaire au démarrage réseau|pxelinux.0]] » à « portable » par DHCP. Sa configuration est identique à celle décrite [[:netboot_live#serveur_dhcp|ici]] ===== Installer et lancer le serveur TFTP ===== Le serveur TFTP est celui qui va fournir les fichiers nécessaires au démarrage réseau. Installez le paquet **[[apt>tftpd-hpa]]** et configurez le comme décrit [[:netboot_live#serveur_tftp|ici]] ===== Installer les fichiers NETBOOT nécessaires au démarrage réseau ===== ==== Installation des fichiers propre à chaque version ==== Chaque version d'Ubuntu propose dans les dépôts des fichiers d'installateur pour les architectures i386 et amd64. Ces fichiers s'appellent tous **netboot.tar.gz**\\ Pour chaque version et pour chaque architecture, il vous faudra télécharger les 2 fichiers et les renommer à bon escient (par exemple netboot_1204_32.tar.gz, ...).\\ http://archive.ubuntu.com/ubuntu/dists/VERSION/main/installer-ARCH/current/images/netboot/netboot.tar.gz Remplacez **VERSION** par la version que vous voulez (//lucid, precise, quantal//) et **ARCH** par la version de l'architecture (//i386, amd64//) Ensuite pour pouvoir différencier tous ces installateurs, il va falloir créer sur le serveur des répertoires spécifiques à chaque version et y décompresser les fichiers téléchargés. Nous allons donner l'exemple de la version Precise Pangolin (12.04). sudo mkdir /var/lib/tftpboot/precise cd /var/lib/tftpboot/precise sudo tar -xzf //netboot_1204_32.tar.gz sudo tar -xzf //netboot_1204_64.tar.gz Les contenus sont fusionnés et le répertoire "ubuntu-installer" contient maintenant un répertoire "i386" et un répertoire "amd64". Vous pouvez répéter l'opération avec une autre version en créant un autre répertoire à coté de "precise". **Ne mélangez pas les versions !** ==== Création du menu de démarrage ==== Il faut pour cela installer sur votre serveur le paquet [[apt>syslinux]] qui contient les bases de l'installation, le fichier « pxelinux.0 » ansi que le gestionnaire de menu "menu.c32". Copiez maintenant depuis les librairies de "syslinux" les fichiers nécessaires: sudo cp /usr/lib/syslinux/pxelinux.0 /var/lib/tftpboot/ sudo cp /usr/lib/syslinux/vesamenu.c32 /var/lib/tftpboot/ sudo cp /usr/lib/syslinux/chain.c32 /var/lib/tftpboot/ Il faut maintenant créer un menu permettant de choisir entre les options (32 et 64 bits). sudo mkdir /var/lib/tftpboot/pxelinux.cfg gksu gedit /var/lib/tftpboot/pxelinux.cfg/default Remplissez, dans un premier temps, votre menu ainsi (exemple pour distribution Precise Pangolin): #default menu for all PXE boot DEFAULT vesamenu.c32 # liste des choix label Boot local disk kernel chain.c32 append hd0 label Precise 32bits installer kernel precise/ubuntu-installer/i386/boot-screens/vesamenu.c32 append precise/ubuntu-installer/i386/boot-screens/menu.cfg label Precise 64bits installer kernel precise/ubuntu-installer/amd64/boot-screens/vesamenu.c32 append precise/ubuntu-installer/amd64/boot-screens/menu.cfg Les fichiers de menu des installateurs font appel à plusieurs fichiers (include) qui sont censés se trouver dans le répertoire "ubuntu-installer" à la racine du serveur tftp.\\ Vous pouvez, si vous ne mettez qu'une version de Ubuntu en ligne créer un lien symbolique pour pallier ce problème : \\ cd /var/lib/tftpboot sudo ln -s precise/ubuntu-installer ubuntu-installer Si vous avez mis en place d'autre répertoires pour d'autres versions, ajoutez les lignes correspondantes en adaptant les chemins du menu. Dans ce cas, il faudra éditer un par un chaque menu dans les répertoires "boot-screens" de chaque version pour corriger les chemins des "include".\\ Il est aussi possible de remplacer automatiquement ces lignes grace à l'utilitaire "sed" (à adapter en fonction de la version utilisée): \\ sudo sed -i "s/ubuntu-installer/precise\/ubuntu-installer/g" /var/lib/tftpboot/precise/ubuntu-installer/{i386,amd64}/boot-screens/* "vesamenu.c32" est en mesure de présenter un menu avec des couleurs personnelles, une image de fond, etc, etc. Une recherche sur internet vous fera découvrir toutes ses [[https://www.google.fr/search?q=vesamenu.c32+options|options]]. Il ne reste plus qu'à tester en démarrant un PC client en mode PXE. ===== Démarrage de l'installation ===== * Démarrez l'ordinateur //portable// par PXE ou au moyen de la disquette Etherboot ou d'un autre media. * Installez Ubuntu par le réseau. A noter que ceci ne suffit pas pour installer Ubuntu via le réseau, il met simplement en place un sous menu (en plus du menu PXE présent de base) afin de démarrer une éventuelle installation d'Ubuntu. Cet article devrait être corrigé afin de correspondre à sa finalité. ===== reliquat de documentation temporairement conservé ===== **À partir d'ici cette documentation est trop ciblée et trop complexe**\\ // Une simplification s'impose en ne donnant qu'un exemple de configuration permettant l'installation réseau de une ou deux versions récentes avec les deux architectures i386 et amd64// === Préparer les fichiers === __Forcer la lecture seule pour tous sauf le propriétaire :__ sudo chmod 755 /var/lib/tftpboot __S'approprier le dossier (si vous voulez faire des modifications sans passer pas le mode administrateur) :__ Cela rend les fichiers modifiables par l'utilisateur courant. Si vous êtes en environnement de production appliquer les règle de séparation de droits en créant un utilisateur autorisé à modifier ce dossier Remplacer **$USER** par le nom de l'utilisateur autorisé à modifier les fichiers. sudo chown $USER:$USER /var/lib/tftpboot Décompressez l'archive dans le répertoire tftp, par exemple : /var/lib/tftpboot/**distrib**/**version** où vous remplacez distrib et version par la distribution désirée et la version de cette distribution, dans notre cas ubuntu et karmic. mkdir -p /var/lib/tftpboot/ubuntu/karmic/i386 && tar -xzf netboot.tar.gz -C /var/lib/tftpboot/ubuntu/karmic/i386 ou version=$(grep CODENAME /etc/lsb-release | sed s/D.*\=//g) distrib=$(grep ID /etc/lsb-release | sed s/D.*\=//g) arch=$(dpkg --print-architecture) mkdir -p /var/lib/tftpboot/$distrib/$version/$arch && tar -xzf netboot.tar.gz -C /var/lib/tftpboot/$distrib/$version/$arch __Appropriation des fichiers décompressés :__ sudo chown -R $USER:$USER /var/lib/tftpboot * Remplacez **karmic** par la version que vous voulez (//dapper feisty gutsy hardy intrepid karmic//) * Remplacez **i386** par la version de l'architecture que vous voulez (//amd64 powerpc sparc//) == Le fichier « pxelinux.0 » et le répertoire « pxelinux.cfg » == Il faut indiquer l'emplacement où se trouvent ces 2 fichiers. Pour cela, il faut éditer le fichier "dhcpd.conf" : gksudo gedit /etc/dhcp3/dhcpd.conf et remplacer la ligne **filename "pxelinux.0";** par **filename "ubuntu/karmic/i386/pxelinux.0";** . En faisant cela on indique le chemin à partir du répertoire de départ qui est /var/lib/tftpboot . Autre méthode : Pour qu'il soient démarrables par tftp, le fichier « pxelinux.0 » et le répertoire « pxelinux.cfg » doivent être à la racine du serveur tftp. Déplacez-les donc par la commande : cp -R /var/lib/tftpboot/$distrib/$version/$arch/pxelinux.* /var/lib/tftpboot/ ==== Configurer les fichiers « PRESEED » et « PXELINUX.CFG » nécessaire au démarrage réseau ==== === Configurer les fichiers « PXELINUX.CFG » === == le fichier « pxelinux.cfg/MAC_ADRESSE_CLIENT » == Il se peut que la prise en compte de l'adresse MAC ne fonctionne pas. L'adresse MAC doit être indiquée sur 7 paires hexadécimal alors qu'elle n'est généralement indiqué que sur 6. il vous faut donc rajouter la paire 01 devant : 01-xx-xx-xx-xx-xx-xx Vous pouvez également utiliser la notation Hexadécimale des IP (utiliser gethostip pour l'obtenir facilement): * pxelinux.cfg/C0A80025 * pxelinux.cfg/C0A8002 * pxelinux.cfg/C0A800 * pxelinux.cfg/C0A80 * pxelinux.cfg/C0A8 * pxelinux.cfg/C0A * pxelinux.cfg/C0 * pxelinux.cfg/C Si ces configurations ne correspondent pas, le fichier default sera alors appliqué: pxelinux.cfg/default Voici un exemple de fichier de configuration, pour l'installation par réseau à distance, proposant la possibilité de démarrer différents systèmes. display ubuntu/edgy/ubuntu-installer/i386/boot-screens/boot.txt #ubuntu/edgy/ubuntu-installer/i386/boot-screens/syslinux.txt default edgyi386server-expert #sargex8626 F1 ubuntu/edgy/ubuntu-installer/i386/boot-screens/f1.txt F2 ubuntu/edgy/ubuntu-installer/i386/boot-screens/f2.txt F3 ubuntu/edgy/ubuntu-installer/i386/boot-screens/f3.txt F4 ubuntu/edgy/ubuntu-installer/i386/boot-screens/f4.txt F5 ubuntu/edgy/ubuntu-installer/i386/boot-screens/f5.txt F6 ubuntu/edgy/ubuntu-installer/i386/boot-screens/f6.txt F7 ubuntu/edgy/ubuntu-installer/i386/boot-screens/f7.txt F8 ubuntu/edgy/ubuntu-installer/i386/boot-screens/f8.txt F9 ubuntu/edgy/ubuntu-installer/i386/boot-screens/f9.txt F0 ubuntu/edgy/ubuntu-installer/i386/boot-screens/f10.txt ### *** UBUNTU EDGY *** # preseed/url=https://server7.kproxy.com/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/s591/s442/s822/s28/p1/edgy-preseed.cfg LABEL edgyi386 kernel ubuntu/edgy/ubuntu-installer/i386/linux append vga=normal initrd=ubuntu/edgy/ubuntu-installer/i386/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw -- LABEL edgyi386oem kernel ubuntu/edgy/ubuntu-installer/i386/linux append vga=normal oem-config/enable=true initrd=ubuntu/edgy/ubuntu-installer/i386/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw -- LABEL edgyi386server kernel ubuntu/edgy/ubuntu-installer/i386/linux append base-installer/kernel/linux/extra-packages-2.6= pkgsel/install-pattern=~t^ubuntu-standard$ pkgsel/language-pack-patterns= pkgsel/install-language-support=false vga=normal initrd=ubuntu/edgy/ubuntu-installer/i386/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw -- LABEL edgyi386expert kernel ubuntu/edgy/ubuntu-installer/i386/linux append DEBCONF_PRIORITY=low vga=normal initrd=ubuntu/edgy/ubuntu-installer/i386/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw -- LABEL edgyi386server-expert kernel ubuntu/edgy/ubuntu-installer/i386/linux append base-installer/kernel/linux/extra-packages-2.6= pkgsel/install-pattern=~t^ubuntu-standard$ pkgsel/language-pack-patterns= pkgsel/install-language-support=false DEBCONF_PRIORITY=low vga=normal initrd=ubuntu/edgy/ubuntu-installer/i386/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw -- LABEL edgyi386rescue kernel ubuntu/edgy/ubuntu-installer/i386/linux append vga=normal initrd=ubuntu/edgy/ubuntu-installer/i386/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw rescue/enable=true -- ### *** UBUNTU DAPPER *** #preseed/url=https://server7.kproxy.com/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/s591/s442/s822/s28/p1/dapper-preseed.cfg LABEL dapperia64 kernel ubuntu/dapper/ubuntu-installer/ia64/linux append vga=normal initrd=ubuntu/dapper/ia64/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw -- LABEL dapperia64server kernel ubuntu/dapper/ubuntu-installer/ia64/linux append base-installer/kernel/linux/extra-packages-2.6= pkgsel/install-pattern=~t^ubuntu-standard$ pkgsel/language-pack-patterns= pkgsel/install-language-support=false vga=normal initrd=ubuntu/dapper/ubuntu-installer/ia64/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw -- LABEL dapperia64expert kernel ubuntu/dapper/ubuntu-installer/ia64/linux append DEBCONF_PRIORITY=low vga=normal initrd=ubuntu/dapper/ubuntu-installer/ia64/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw -- LABEL dapperia64server-expert kernel ubuntu/dapper/ubuntu-installer/ia64/linux append base-installer/kernel/linux/extra-packages-2.6= pkgsel/install-pattern=~t^ubuntu-standard$ pkgsel/language-pack-patterns= pkgsel/install-language-support=false DEBCONF_PRIORITY=low vga=normal initrd=ubuntu/dapper/ubuntu-installer/ia64/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw -- LABEL dapperia64rescue kernel ubuntu/dapper/ubuntu-installer/ia64/linux append vga=normal initrd=ubuntu/dapper/ubuntu-installer/ia64/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw rescue/enable=true -- ### *** DEBIAN SARGE *** #preseed/url=https://server7.kproxy.com/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/s591/s442/s822/s28/p1/sarge-preseed.cfg label sargex86 kernel debian/sarge/i386/linux append vga=normal initrd=debian/sarge/i386/initrd.gz ramdisk_size=9458 root=/dev/rd/0 devfs=mount,dall rw -- label sargex86expert kernel debian/sarge/i386/linux append DEBCONF_PRIORITY=low vga=normal initrd=debian/sarge/i386/initrd.gz ramdisk_size=9458 root=/dev/rd/0 devfs=mount,dall rw -- label sargex8626 kernel debian/sarge/i386/2.6/linux append vga=normal initrd=debian/sarge/i386/2.6/initrd.gz ramdisk_size=10938 root=/dev/rd/0 devfs=mount,dall rw -- label sargex86expert26 kernel debian/sarge/i386/2.6/linux append DEBCONF_PRIORITY=low vga=normal initrd=debian/sarge/i386/2.6/initrd.gz ramdisk_size=10938 root=/dev/rd/0 devfs=mount,dall rw -- label sargeia64 kernel debian/sarge/ia64/vmlinuz append vga=normal initrd=debian/sarge/ia64/initrd.gz ramdisk_size=9458 root=/dev/rd/0 devfs=mount,dall rw -- label sargeia64expert kernel debian/sarge/ia64/vmlinuz append DEBCONF_PRIORITY=low vga=normal initrd=debian/sarge/ia64/initrd.gz ramdisk_size=9458 root=/dev/rd/0 devfs=mount,dall rw -- label sargeia6426 kernel debian/sarge/ia64/2.6/vmlinuz append vga=normal initrd=debian/sarge/ia64/2.6/initrd.gz ramdisk_size=10938 root=/dev/rd/0 devfs=mount,dall rw -- label sargeia64expert26 kernel debian/sarge/ia64/2.6/vmlinuz append DEBCONF_PRIORITY=low vga=normal initrd=debian/sarge/ia64/2.6/initrd.gz ramdisk_size=10938 root=/dev/rd/0 devfs=mount,dall rw -- prompt 1 timeout 600 == le fichier « ../boot-screens/f3.txt » == Si vous voulez voir les possibilités à distance, il faut éditer le fichier f3.txt et y rajouter les labels par exemple comme ceci.  0fBOOT METHODS07 09F307 0fAvailable boot methods:07 0f*** UBUNTU ***07 0fedgyi38607 0fedgyi386server07 0fedgyi386expert07 0fedgyi386server-expert07 0fedgyi386rescue07 0fdapperia6407 0fdapperia64server07 0fdapperia64expert07 0fdapperia64server-expert07 0fdapperia64rescue07 0f*** DEBIAN ***07 0fsargex8607 0fsargex86expert07 0fsargex862607 0fsargex86expert2607 0fsargeia6407 0fsargeia64expert07 0fsargeia642607 0fsargeia64expert2607 0fsargememtest07 Perform a memory test. Press F1control and F then 1 for the help index, or ENTER to === Configurer les fichiers « Preseed » === **Rappel :** "d-i il est inhérent à //PRESEED// de ne pas être securisé. Rien dans les vérifications de l'installeur ne permet de vérifier les tentatives d'exploitation de faille(exploits) ou de dépassement de tampon(buffer overflows) des valeurs d un ficher preseed comme celui-ci. N'utilisez que des fichiers preseed d'hôtes de confiances!". Le fichier preseed permet d'automatiser certaine tâche de l'installation.\\ il faut le spécifier dans la ligne de chargement du noyau, du fichier « [[#Configurer les fichiers PXELINUX.CFG|pxelinux.cfg]] ».\\ Celui-ci est pour dapper accéssible du net, il en existe aussi un pour edgy (edgy-preseed.cfg). LABEL dapperi386 kernel ubuntu/dapper/ubuntu-installer/i386/linux append vga=normal initrd=ubuntu/dapper/ubuntu-installer/i386/initrd.gz ramdisk_size=16464 root=/dev/rd/0 rw preseed/url=https://server7.kproxy.com/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/s591/s442/s822/s28/p1/dapper-preseed.cfg -- == le fichier « preseed » == Voici un exemple de fichier de configuration, pour l'installation par réseau a distance, preseed.cfg pour les differentes versions le paramètre à changer obligatoirement est la section mirror/suite : d-i mirror/suite string edgy Vous pouvez aussi changer l'adresse du miroir dans country (si vous avez une erreur « ne peut recupérer les modules noyau » ou « aucun module pour ce noyau » mettez à jour le noyau et l'//initrd// en les re-récuperant) : d-i mirror/country string fr Le fichier complet : #### Modifying syslinux.cfg. # Edit the syslinux.cfg (or similar) file, and add parameters to the end # of the append line(s) for the kernel. # # You'll at least want to add a parameter telling the installer where to # get its preseed file from. # If you're installing from USB media, use this, and put the preseed file # in the toplevel directory of the USB stick. # preseed/file=/hd-media/preseed # If you're netbooting, use this instead: # preseed/url=https://server7.kproxy.com/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/sruj/shhzdcy/s7iwolzo/p2/servlet/redirect.srv/syyvp/p1/path/to/preseed# If you're remastering a CD, you could use this: # preseed/file=/cdrom/preseed # Be sure to copy this file to the location you specify. # # While you're at it, you may want to throw a debconf/priority=critical in # there, to avoid most questions even if the preseeding below misses some. # And you might set the timeout to 1 in syslinux.cfg to avoid needing to hit # enter to boot the installer. # # Language, country, and keyboard selection cannot be preseeded from a file, # because the questions are asked before the preseed file can be loaded. # Instead, to avoid these questions, pass some more parameters to the kernel: # # preseed/locale=fr_FR # console-keymaps-at/keymap=fr # # If you need to pick a particular interface when netbooting before reading # a preseed URL, pass a parameter like this as well: # # netcfg/choose_interface=eth1 # # Note that the kernel accepts a maximum of 8 command line options and # 8 environment options (including any options added by default for the # installer). If these numbers are exceeded, 2.4 kernels will drop any # excess options and 2.6 kernels will panic. With kernel 2.6.9 or newer, # you can use 32 command line options and 32 environment options. # Some of the default options, like 'vga=normal' and 'devfs=mount' may be # safely removed for most installations, which may allow you to add more # options for preseeding. #### Shell commands. # d-i preseeding is inherently not secure. Nothing in the installer checks # for attempts at buffer overflows or other exploits of the values of a # preseed file like this one. Only use preseed files from trusted # locations! To drive that home, and because it's generally useful, here's # a way to run any shell command you'd like inside the installer, # automatically. # This first command is run as early as possible, just after # preseeding is read. #d-i preseed/early_command string wget http://url/to/my.udeb -O /tmp/my.udeb ; udpkg -i /tmp/my.udeb # This command is run just before the install finishes, but when there is # still a usable /target directory. #d-i preseed/late_command string for deb in /hd-media/*.deb; do cp $deb /target/tmp; chroot /target dpkg -i /tmp/$(basename $deb); done # This command is run just as base-config is starting up. #base-config base-config/early_command string echo hi mom # This command is run after base-config is done, just before the login: # prompt. This is a good way to install a set of packages you want, or to # tweak the configuration of the system. #base-config base-config/late_command string apt-get install zsh; chsh -s /bin/zsh #### Network configuration. # Of course, this won't work if you're loading your preseed file from the # network! But it's great if you're booting from CD or USB stick. You can # also pass network config parameters in on the kernel params if you are # loading preseed files from the network. # netcfg will choose an interface that has link if possible. This makes it # skip displaying a list if there is more than one interface. #d-i netcfg/choose_interface select auto # To pick a particular interface instead: #d-i netcfg/choose_interface select eth1 # If you prefer to configure the network manually, here's how: #d-i netcfg/disable_dhcp boolean true #d-i netcfg/get_nameservers string 192.168.1.1 #d-i netcfg/get_ipaddress string 192.168.1.42 #d-i netcfg/get_netmask string 255.255.255.0 #d-i netcfg/get_gateway string 192.168.1.1 #d-i netcfg/confirm_static boolean true # Note that any hostname and domain names assigned from dhcp take # precedence over values set here. However, setting the values still # prevents the questions from being shown even if values come from dhcp. #d-i netcfg/get_hostname string unassigned-hostname #d-i netcfg/get_domain string unassigned-domain # Disable that annoying WEP key dialog. #d-i netcfg/wireless_wep string # The wacky dhcp hostname that some ISPs use as a password of sorts. #d-i netcfg/dhcp_hostname string radish #### Mirror settings. d-i mirror/country string fr d-i mirror/http/hostname string http://archive.ubuntu.com d-i mirror/http/directory string /ubuntu d-i mirror/suite string edgy #d-i mirror/http/proxy string ### Partitioning. # If the system has free space you can choose to only partition that space. #d-i partman-auto/init_automatically_partition select Use the largest continuous free space # Alternatively, you can specify a disk to partition. The device name can # be given in either devfs or traditional non-devfs format. # For example, to use the first disk devfs knows of: #d-i partman-auto/disk string /dev/discs/disc0/disc # You can choose from any of the predefined partitioning recipes: #d-i partman-auto/choose_recipe select All files in one partition (recommended for new users) #d-i partman-auto/choose_recipe select Desktop machine #d-i partman-auto/choose_recipe select Multi-user workstation # Or provide a recipe of your own... # The recipe format is documented in the file devel/partman-auto-recipe.txt. # If you have a way to get a recipe file into the d-i environment, you can # just point at it. #d-i partman-auto/expert_recipe_file string /hd-media/recipe # If not, you can put an entire recipe in one line. This example creates # a small /boot partition, suitable swap, and uses the rest of the space # for the root partition: #d-i partman-auto/expert_recipe string boot-root :: 20 50 100 ext3 $primary{ } $bootable{ } method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ /boot } . 500 10000 1000000000 ext3 method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ / } . 64 512 300% linux-swap method{ swap } format{ } . # For reference, here is that same recipe in a more readable form: # boot-root :: # 40 50 100 ext3 # $primary{ } $bootable{ } # method{ format } format{ } # use_filesystem{ } filesystem{ ext3 } # mountpoint{ /boot } # . # 500 10000 1000000000 ext3 # method{ format } format{ } # use_filesystem{ } filesystem{ ext3 } # mountpoint{ / } # . # 64 512 300% linux-swap # method{ swap } format{ } # . # This makes partman automatically partition without confirmation. #d-i partman/confirm_write_new_label boolean true #d-i partman/choose_partition select Finish partitioning and write changes to disk #d-i partman/confirm boolean true #### Boot loader installation. # Grub is the default boot loader (for x86). If you want lilo installed # instead, uncomment this: #d-i grub-installer/skip boolean true # This is fairly safe to set, it makes grub install automatically to the MBR # if no other operating system is detected on the machine. #d-i grub-installer/only_debian boolean true # This one makes grub-installer install to the MBR if if finds some other OS # too, which is less safe as it might not be able to boot that other OS. #d-i grub-installer/with_other_os boolean true # Alternatively, if you want to install to a location other than the mbr, # uncomment and edit these lines: #d-i grub-installer/bootdev string (hd0,0) #d-i grub-installer/only-debian boolean false #d-i grub-installer/with_other_os boolean false ##### Finishing up the first stage install. # Avoid that last message about the install being complete. #d-i prebaseconfig/reboot_in_progress note ##### Preseeding base-config. # XXX: Note that most of this will not work right until base-config 2.40.4 # is available. # Avoid the introductory message. #base-config base-config/intro note # Avoid the final message. #base-config base-config/login note # If you installed a display manager, but don't want to start it immediately # after base-config finishes. #base-config base-config/start-display-manager boolean false ###### Time zone setup. # Controls whether or not the hardware clock is set to GMT. #base-config tzconfig/gmt boolean true # If you told the installer that you're in the United States, then you # can set the time zone using this variable. # (Choices are: Eastern, Central, Mountain, Pacific, Alaska, Hawaii, # Aleutian, Arizona East-Indiana, Indiana-Starke, Michigan, Samoa, other) #base-config tzconfig/choose_country_zone/US select Eastern # If you told it you're in Canada. # (Choices are: Newfoundland, Atlantic, Eastern, Central, # East-Saskatchewan, Saskatchewan, Mountain, Pacific, Yukon, other) #base-config tzconfig/choose_country_zone/CA select Eastern # If you told it you're in Brazil. (Choices are: East, West, Acre, # DeNoronha, other) #base-config tzconfig/choose_country_zone/BR select East # Many countries have only one time zone. If you told the installer you're # in one of those countries, you can choose its standard time zone via this # question. #base-config tzconfig/choose_country_zone_single boolean true # This question is asked as a fallback for countries other than those # listed above, which have more than one time zone. You can preseed one of # the time zones, or "other". #base-config tzconfig/choose_country_zone_multiple select ###### Account setup. # To preseed the root password, you have to put it in the clear in this # file. That is not a very good idea, use caution! #passwd passwd/root-password password r00tme #passwd passwd/root-password-again password r00tme # If you want to skip creation of a normal user account. #passwd passwd/make-user boolean false # Alternatively, you can preseed the user's name and login. #passwd passwd/user-fullname string Ubuntu User #passwd passwd/username string ubuntu # And their password, but use caution! #passwd passwd/user-password password insecure #passwd passwd/user-password-again password insecure ###### Apt setup. # This question controls what source the second stage installation uses # for packages. Choices are cdrom, http, ftp, filesystem, edit sources list # by hand base-config apt-setup/uri_type select http # If you choose ftp or http, you'll be asked for a country and a mirror. #base-config apt-setup/country select enter information manually base-config apt-setup/hostname string http://archive.ubuntu.com base-config apt-setup/directory string /ubuntu # Stop after choosing one mirror. base-config apt-setup/another boolean true # You can choose to install non-free and contrib software. #base-config apt-setup/universe boolean true #base-config apt-setup/multiverse boolean true # Do enable security updates. base-config apt-setup/security-updates boolean true ###### Package selection. # You can choose to install any combination of tasks that are available. # Available tasks as of this writing include: Desktop environment, # Web server, Print server, DNS server, File server, Mail server, # SQL database, manual package selection. The last of those will run # aptitude. You can also choose to install no tasks, and force the # installation of a set of packages in some other way. # XXX: this will not work until tasksel 2.12 is available tasksel tasksel/first multiselect Desktop environment, Web server, Mail server, DNS server ###### Mailer configuration. # During a normal install, exim asks only two questions. Here's how to # avoid even those. More complicated preseeding is possible. #exim4-config exim4/dc_eximconfig_configtype select no configuration at this time # It's a good idea to set this to whatever user account you choose to # create. Leaving the value blank results in postmaster mail going to # /var/mail/mail. #exim4-config exim4/dc_postmaster string ###### X Configuration. # Preseeding Ubuntu's X config is possible, but you probably need to know # some details about the video hardware of the machine, since Ubuntu's X # configurator does not do fully automatic configuration of everything. # X can detect the right driver for some cards, but if you're preseeding, # you override whatever it chooses. Still, vesa will work most places. #xserver-xorg xserver-xorg/config/device/driver select vesa # A caveat with mouse autodetection is that if it fails, X will retry it # over and over. So if it's preseeded to be done, there is a possibility of # an infinite loop if the mouse is not autodetected. #xserver-xorg xserver-xorg/autodetect_mouse boolean true # Monitor autodetection is recommended. #xserver-xorg xserver-xorg/autodetect_monitor boolean true # Uncomment if you have a LCD display. #xserver-xorg xserver-xorg/config/monitor/lcd boolean true # X has three configuration paths for the monitor. Here's how to preseed # the "medium" path, which is always available. The "simple" path may not # be available, and the "advanced" path asks too many questions. #xserver-xorg xserver-xorg/config/monitor/selection-method select medium #xserver-xorg xserver-xorg/config/monitor/mode-list select 1024x768 @ 60 Hz ###### Everything else. # Depending on what software you choose to install, or if things go wrong # during the installation process, it's possible that other questions may # be asked. You can preseed those too, of course. To get a list of every # possible question that could be asked during an install, do an # installation, and then run these commands: # debconf-get-selections --installer > file # debconf-get-selections >> file # If you like, you can include other preseed files into this one. # Any settings in those files will override pre-existing settings from this # file. More that one file can be listed, separated by spaces; all will be # loaded. The included files can have preseed/include directives of their # own as well. Note that if the filenames are relative, they are taken from # the same directory as the preseed file that includes them. #d-i preseed/include string x.cfg # More flexably, this runs a shell command and if it outputs the names of # preseed files, includes those files. For example, to switch configs based # on a particular usb storage device (in this case, a built-in card reader): #d-i preseed/include_command string if $(grep -q "GUID: 0aec3050aec305000001a003" /proc/scsi/usb-storage-*/*); then echo kraken.cfg; else echo otherusb.cfg; fi ==== Activez le serveur TFTP-HPA ==== - Si vous utilisez **inetd**, vérifiez que le serveur est actif grâce à la commande : $ cat /etc/inetd.conf | grep tftp tftp dgram udp wait root /usr/sbin/in.tftpd /usr/sbin/in.tftpd -s /var/lib/tftpboot Sinon ajoutez la ligne au fichier /etc/inetd.conf. Redémarrer inetd : sudo /etc/init.d/inetd restart - Si vous utilisez **xinetd**, ajouter dans « /etc/xinetd.d/tftp » : service tftp { disable = no socket_type = dgram wait = yes user = root server = /usr/sbin/in.tftpd server_args = -v -s /var/lib/tftpboot only_from = 192.168.2.0/24 interface = 192.168.2.1 } Redémarrez **xinetd** : sudo killall -HUP xinetd ===== Disquette d'amorçage pour « portable » (pas nécessaire pour PXE) ===== Construisez une disquette de démarrage **Etherboot** (Ethernet). //portable// (la cible) à une carte réseau 3Com : 3c905 NIC Téléchargez et décompréssez Etherboot (etherboot-X.X.X.tar.bz2 depuis SourceForge dans mon cas). [[http://etherboot.sourceforge.net/doc/html/documentation.html | Documentation « Etherboot »]] Créez une disquette d'amorçage (insérez une disquette dans le lecteur). make bin/3c90x.zfd0 (remplacez « 3c90x » par le type de votre carte) ===== Netboot et test mémoire ===== Il est possible de réaliser le test mémoire d'un PC client "PXE" avec l'utilitaire MemTest86+ située sur un serveur tel que défini ci dessus. Ceci est particulièrement intéressant si vous possédez par exemple un PC portable sans lecteur Disquette/CD/DVD, incapable de booter sur support USB, et dont vous avez un doute sur l'état de la mémoire vive ... et bien non ! votre cas n'est pas désespéré : L'utilitaire est disponible ici : [[http://www.memtest.org/]]. Vous choisirez le « Pre-Compiled Bootable Binary ». Télécharger le fichier "memtest86+-2.11.bin.gz". Le décompresser pour obtenir le binaire au format memtest86+-2.10.bin (la version importe peu). Déplacer et renommer le binaire dans le répertoire dédié au transfert tftp. mv memtest86+-2.10.bin /var/lib/tftpboot/memtest.gz (Pour une raison que j'ignore le fichier doit avoir une extension ".gz") Editer, modifier ou créer le fichier /var/lib/tftpboot/pxelinux.cfg/default suivant votre cas. DEFAULT menu.c32 MENU MARGIN 0 MENU ROWS -9 MENU TABMSG MENU TABMSGROW -3 MENU CMDLINEROW -3 MENU HELPMSGROW -4 MENU HELPMSGENDROW -1 MENU COLOR SCREEN 30;47 MENU COLOR BORDER 30;47 MENU COLOR TITLE 30;47 MENU COLOR SCROLLBAR 30;47 MENU COLOR SEL 37;40 MENU COLOR UNSEL 30;47 MENU COLOR CMDMARK 30;47 MENU COLOR CMDLINE 30;47 MENU COLOR TABMSG 37;40 MENU COLOR DISABLED 37;40 MENU COLOR HELP 37;40 LABEL Lancer MemTest KERNEL memtest.gz Voilà, c'est fini, vous pouvez démarrer votre PC client et bénéficier du fameux logiciel de test mémoire. {{:memtest.png}} ===== Voir aussi ===== * [[netboot_live | Netboot avec l'environnement LiveCD]] * [[http://etherboot.sourceforge.net/doc/html/documentation.html | Documentation sur « Etherboot »]] * http://nlsn.free.fr/lin-docs/xterminal/diskless-xterminal/node5.html ---- // Contributeurs :[[contributeurs|les contributeurs d'Ubuntu-fr]] [[utilisateurs:benje]], [[utilisateurs:lo_pescofi]].//